ZSY series is a kind of hard-tooth gearbox produced according to JB/T8853-2001. Its shafts are assembled parallel. They are widely used in mining, metallurgy, lifting, transportation, cement, building, painting, pharmaceutical industries, textile, and chemical industries.
Features of ZSY500 Hard Tooth Gearboxes For Glue Breaker:
1. The gears are all made of high-quality low-carbon alloy steel by normalizing and carburizing. The hardness of the gears reaches HRC58-62. The gears are all grinded with high precision and good contact.
2. High transmission efficiency: single stage's efficiency is more than 96.5%, double stage's more than 93%, three stage's more than 90%
3. This series reduction gearbox has a small size, lightweight, large bearing capacity, and longer life.
4. High stability, stable operation, low noise.
5. The main parameters, such as center distance and transmission ratio, have been optimized, and the main parts have good interchangeability, easy disassembly and installation.
6. Generally, oil pool lubrication and natural cooling are used. When the thermal power is insufficient, circulating oil lubrication or fan and cooling plate can be used for cooling.
Conditions when using ZSY500 Hard Tooth Gearboxes For Glue Breaker:
1. The input speed of the high-speed shaft of the reducer is not more than 1500r / min
2. The peripheral speed of the reducer's gear shall not be more than 20 m / s.
3. The working environment temperature of the reducer is - 40 ~ + 50 ºC. When the temperature is lower than 0 ºC, the lubricating oil needs to be preheated to above 0 ºC before starting.
4. The reducer can operate in both positive and negative directions.
Other Models | ZSY160 | ZSY335 |
| ZSY180 | ZSY400 |
| ZSY200 | ZSY450 |
| ZSY224 | ZSY500 |
| ZSY250 | ZSY560 |
| ZSY280 | ZSY630 |
| ZSY315 | ZSY710 |
